Rezultati pretrage
- AKG (177)
- AMX (7)
- APPLE (32)
- ASL (5)
- AUDEMAT AZTEC (18)
- AUDIO PRECISION (5)
- AXIA (5)
- BSS (13)
- BW BROADCAST (5)
- CANARE (13)
- CANON (2)
- CLEAR-COM (4)
- CORDIAL (32)
- CROWN (37)
- DBX (60)
- DENON (23)
- DENON DJ (21)
- DIS (46)
- DRAWMER (36)
- ESSER (36)
- EUROTRUSS (50)
- EXTRON (14)
- FTR (9)
- GATOR (39)
- GENELEC (42)
- HARRIS (13)
- IC AUDIO (22)
- IQINVISION (4)
- JBL (117)
- K&M (49)
- LEXICON (17)
- LITEPANELS (24)
- LSC LIGHTING (17)
- MARANTZ (11)
- MARTIN (64)
- MIRASYS (4)
- MOGAMI (8)
- NEUTRIK (56)
- NTI (13)
- OMNIA (4)
- PAG (5)
- PETROL (20)
- PORTA BRACE (2)
- SACHTLER (9)
- SONIFEX (5)
- SONY (94)
- SOUNDCRAFT (41)
- SOUNDFIELD (15)
- STRAND LIGHTING (8)
- STUDER (15)
- TASCAM (50)
- TELEX (5)
- TELOS (5)
CROWN I-T6000
2-kanalno pojačalo, 3000W / 4 Ohma
Tehničke značajke
Two channel audio amplifier
Global Power Supply with PFC (Power Factor Correction) works anywhere in the world
Onboard DSP with 24-bit, 96 kHz Cirrus Logic A/D and D/A converters
AES/EBU digital audio input
3rd-generation patented Class I (BCA) circuitry couples power effi ciently to the load and provides low AC current drain
Light weight due to aluminum construction, special internal construction and switching power supply
Ethernet connector accepts an RJ-45 connector for HiQnet and TCP/IQ networking
Tehnička specifikacija
Output Power (20 Hz - 20 kHz Power refers to guaranteed minimum power in watts with 0.35% THD): 3000W @ 4 Ohm per Channel (Stereo)
Load Impedance: Safe with all types of loads. Rated for 1, 2, 4 and 8 ohms in Stereo mode, 2, 4 and 8 ohms in Bridge-Mono mode
Voltage Gain at 1kHz (referenced to 8 ohm rated output): 37.9 dB to 23 dB
Frequency Response: ±0.25 dB from 20 Hz to 20 kHz at 1 watt
Phase Response: ±15 degrees from 20 Hz to 20 kHz at 1 watt
Signal to Noise Ratio below rated full-bandwidth power, A-weighted: > 105 dB
Total Harmonic Distortion (THD) at full rated power: < 0.35%.
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –35 dB: < 0.35%.
Damping Factor (20 Hz to 100 Hz at 8 ohms): > 5000
Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB
Common Mode Rejection (CMR): Greater than 50 dB from 20 Hz to 1 kHz
DC Output Offset (Shorted Input): <±3 mV
Maximum Input Level: +15 dBu or +21 dBu, depending on input sensitivity
Latency (analog, digital inputs): 1.13 mS analog, 1.81 mS digital (96 kHz)
A/D, D/A Converters: 24-bit 96 kHz Cirrus Logic
Digital Input: AES/EBU, 24-bit, 32-48 kHz. Onboard sample-rate converter
Network: Onboard TCP/IQ and HiQnet, compatible with standard 100 Mb Ethernet hardware
DSP: 24-bit conversion with 32-bit, floating-point DSP processing. Has 64 assignable filters with 9 different filter types. Includes all-pass filters, over 2 seconds of delay available per channel, and dual uncorrelated-noise and sine-wave generators
Load Supervision: Monitors the average impedance on the output of the amplifi er. If the impedance falls outside the specifi ed high/low limits, this function alerts the user via the front panel display, and via System Architect or IQwic™ software
Attenuators: Speed sensitive, continuously variable rotary encoder, 0.5 dB steps, range 0 to –100 dB
Input Sensitivity (referenced to 8 ohm rated output): Adjustable in 0.1V steps from 1.4V to 7.75V
CROWN-Data sheet-I-T6000
